How to Use Fire Pump
Home » News » News » How to Use Fire Pump

How to Use Fire Pump

Views: 0     Author: Site Editor     Publish Time: 2023-07-26      Origin: Site

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Using a fire pump is a crucial skill in firefighting and emergency situations. Follow these steps to effectively use a fire pump:

1. Set up: 

Place the fire pump near a water source, such as a lake or pool, and ensure it is on stable ground.

2. Prime the pump: 

Fill the pump's intake hose with water to remove air and create suction.

3. Connect hoses: 

Attach the discharge hose to the pump outlet and the other end to the nozzle or firefighting equipment.

4. Start the engine: 

Turn on the pump's engine and allow it to warm up.

5. Open the water source: 

If using a portable water source, like a tanker, open the valve to allow water flow to the pump.

6. Control pressure: 

Adjust the pressure settings to match the firefighting requirements.

7. Engage the nozzle:

If using a nozzle, open it to start the flow of water.

8. Direct the flow:

 Aim the nozzle or firefighting equipment at the base of the fire and sweep back and forth.

9. Monitor and adjust:

 Regularly check water levels and pressure, making adjustments as needed.

10. Shutdown: 

Once the fire is under control, close the nozzle and turn off the pump's engine.

Remember, using a fire pump demands proper training and caution. Always wear appropriate protective gear and adhere to safety guidelines.